|
Post by bigjohnsparky on Jul 31, 2018 21:11:34 GMT
Hi all If you rotate your wheels to get a even ware on tyres etc then this is how you can reset the tpms system
1) Apply parking brake. Turn ignition to ON position with engine OFF 2) Press and hold the unlock and lock buttons (at the same time) on the key fob until horn sounds and then nearside front indicator will become illuminated. 3) Starting with nearside front tyre increase/decrease tyre pressure until horn sounds. 4) After horn sounds proceed as in step 3 for the next 3 sensors in the following order: Offside front, Offside rear then Nearside rear - indicators will illuminate in that order showing which tyre needs to be pressurised/depressurised. After doing Nearside rear tyre the horn will sound twice. 5) Turn ignition to OFF position to exit the learn mode. Adjust all tyres to required pressure.
|
|
|
Post by TonyM on Aug 1, 2018 4:20:00 GMT
I am due two front tyres soon, I have a feeling the tyre fitters will leave the TPMS to me.. Thanks for the tip Big John
|
|
|
Post by bigjohnsparky on Aug 1, 2018 13:41:20 GMT
What tyres will you go for Hancooks ? Tpms will only need resetting if wheels are refitted in different position as the tpms wheel valve is paired to the receiver under each wheel arch 👍
|
|